The shot blasting machine is a machine equipment, and the editor will continue to explain its related knowledge content. If it is summarized specifically, there are mainly two contents: first, the protection plate in the shot blasting machine, and second, what are the daily inspection contents in the pre-treatment shot blasting machine. The purpose is to hope that through these contents, everyone can have a better understanding of the shot blasting machine, thereby increasing their knowledge in this area. Since that's the case, the editor won't say much and will elaborate on the specific content.

1. Protective plate in shot blasting machine

The protective plate in the shot blasting machine is generally made of cast iron, because during heat treatment, as long as different heating and insulation temperatures are controlled, cast iron with different performance characteristics can be obtained, which can meet different needs. So, cast iron is the material used to manufacture protective plates.

2. Daily inspection in pre-treatment shot blasting machine

(1) Check for any looseness in the fixing bolts on the motor in the shot blasting machine, and tighten them in a timely manner.

(2) What is the wear condition of the wear-resistant parts in the equipment, and does it need to be replaced.

(3) Is there any air leakage in the pipeline, is there any blockage in the dust collector, and is there any accumulation on the filter screen of the separator.

(4) How is the wear of the protective plate and whether the limit switch can be used normally.

(5) Can the indicator light display normally? Is there any dust on the electrical control box? If there is, it should be cleaned in a timely manner.